Anyone can go and work the efficiency of the suns ray’s with the use of homemade solar panels. Because people nowadays are moving into regulating whatever resources they have come to consume greedily within the past decades, generation of power is now being utilized with by using solar panels for such purposes. Not only would having solar panels at home aid in providing electricity when unavailable, it would also work to provide more venues in lowering costs usually dealt with electric consumption.

The Advantages Of Homemade Solar Panels

Making use of the most abundant natural resource, which is the sun, homemade solar panels are bound to work to anyone’s advantage. Knowing how to make solar panels will give anyone a chance to maximize energy production in use without any additional costs, as compared to using electricity.

Those who are interested in using homemade solar panels for their households will find that making them is easy. The guide below on building solar panels will help one in the way of pursuing this venture, which will help contribute greatly to the conservation of our natural resources.

Homemade Solar Panels Tip 1: Copper Flashing Will Be Your Plates

Building homemade solar panels would be a task that is easy for anyone who’s handy with tools. What you first need to do is purchase some copper flashing from a hardware store, which would be quite easy to procure. Clean the copper flashing first, making sure that it is free of any dirt and grime. You may use sandpaper to work off any corroded areas that might be present.

The next step on how to make solar panels for your home would be to measure the size of the panels that you will have. They should be about a square or rectangle that will roughly fit the size of an electric burner that you will be using. The use of the electric burning in making homemade solar panels would be to cook the copper flashing, so they will have an efficient layer of black cupric oxide. This can be achieved by having the copper flashing burn over the device for about 30 minutes or so. Ensure that you burn it efficiently, as you would need to go and have plenty of cupric oxide that you will be scrubbing off later.

Homemade Solar Panels Tip 2: Clean Your Copper Plates Properly

Once you have a layer of black cupric oxide, you can go ahead and cool the copper flashing. You have to do the process slowly in order to have efficient homemade solar panels, as it will slowly work in getting the black layer of oxide off the panels. One has to be gentle when it comes to doing this though, as there should be red cuprous oxide left in the cooked copper flashing. Make sure you don’t scrub any of these off, as they are needed to power up DIY solar panels.

The next step that you will have to do in creating homemade solar panels would be to cut off another layer of copper flashing. This should be about the same size of your cooked copper flashing. The layer will be perfect in measuring the energy that homemade solar panels can produce, so ensure that they are of the same size.

You will now need either a glass or plastic jar with the top cut off. This will basically house your homemade solar panels for the meantime, to measure if they are efficient in conducting the sun’s energy. You will then have to bend the cooked and uncooked copper flashing gently, so they will fit into the jar. Make sure you let the top side of the cooked copper flashing face the wall of the jar, as it is the smoother area compared to the one that had been burnt.

Homemade Solar Panels Tip 3: Measure Your Copper Plates Energy Projection

You will then have to soak the bottom parts of your homemade solar panels with hot water mixed with salt. Make sure that it only covers a shallow portion of the glass or plastic jar. Afterwards, get a sensitive micro-ammeter. It should be something that can read currents that are between 0 and 50 micro amperes. You have to attach the needles to an alligator clip, which will then be used to measure the energy of your homemade solar panels.

One has to attach the positive terminal clip into the clean and uncooked copper plate. The negative terminal alligator clip goes to the cooked one. Exposing the homemade solar panels to the sun will show if your venture works. The sun’s energy will then run through from the cooked copper plate, which contains the semiconductor cuprous oxide. It will then travel into the saltwater solution, to the clean plate, to the meter, then back to the cooked copper plate.

Homemade Solar Panels Summary And Further Information

Under shadow or without presence of the sun, what your homemade solar panels may generate will be zero energy, but when exposed to such, it can shoot as high as 50 microamps, making your experiment a successful venture.